11-19-2024, 01:29 AM
By 'paste' I just mean do Ctrl+V or (Cmd+V on Mac), there is no special button or 'option' for it.
It's possible that some features will work ok with that old firmware but since it was not made for the boards you have, some features will not. Some pin numbers will be different too. I know for sure that one of the UARTs was changed, I can't remember what else. If the GPS does nothing on the UART from that old code snippet, try the other UARTs. To get everything working fully will require a proper target to be made for the v1.0 board.
Activation is my way of making a buck when people build their own boards, since the hardware is open source. I added a couple credits for you, try again. Activation example is shown in the 'how to make your own' video: https://youtu.be/BKhxOeRhcWc?t=1610
It's possible that some features will work ok with that old firmware but since it was not made for the boards you have, some features will not. Some pin numbers will be different too. I know for sure that one of the UARTs was changed, I can't remember what else. If the GPS does nothing on the UART from that old code snippet, try the other UARTs. To get everything working fully will require a proper target to be made for the v1.0 board.
Activation is my way of making a buck when people build their own boards, since the hardware is open source. I added a couple credits for you, try again. Activation example is shown in the 'how to make your own' video: https://youtu.be/BKhxOeRhcWc?t=1610