Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Cant tick Com port
#4
Oh boy, v1.0 that's really going back, I think there were only 5 of those ever made. The good news is I do happen to have one right here, but there were some pin changes between 1.0 and 1.1 and I was kinda thinking never to support that really old board going forward. So there is currently no firmware ready to go... I will have to study my early PCB design and figure out what the old pin mappings were, and make a firmware that targets the 1.0 board again. Might be able to get it ready sometime this week.

About the program currently on your boards, it's a pretty simply one that wouldn't take long to re-create. But I was looking through some old notes I took back then and came across something titled "Demo for Brett" which I can only imagine is what you have there. In the configurator, make sure the keyboard focus is on the main nodes area and then paste this:

Code:
{"viewCenter":{"x":485,"y":555},"viewZoom":0.5966,"nodes":[{"id":1,"type":"imu","properties":{"prop_imu_field":"option_imu_field_pitch","prop_imu_device":""},"pos":{"x":-205.46,"y":220.89}},{"id":2,"type":"rgbledindices","properties":{"prop_rgbled_color":"#3","prop_rgbled_indices":"1"},"pos":{"x":529.18,"y":271.26}},{"id":3,"type":"color","properties":{"prop_color_red":"#4","prop_color_green":"#8","prop_color_blue":"0","prop_color_value":"bdbebf"},"pos":{"x":354.6,"y":274.14}},{"id":4,"type":"binaryop","properties":{"prop_binaryop_left":"#5","prop_binaryop_type":"option_binaryop_type_gt","prop_binaryop_right":"20"},"pos":{"x":157.58,"y":218.54}},{"id":5,"type":"unaryop","properties":{"prop_source":"#1","prop_unaryop_type":"option_unaryop_type_abs"},"pos":{"x":-30.42,"y":218.08}},{"id":6,"type":"imu","properties":{"prop_imu_field":"option_imu_field_roll"},"pos":{"x":-203.06,"y":325.04}},{"id":7,"type":"unaryop","properties":{"prop_source":"#6","prop_unaryop_type":"option_unaryop_type_abs"},"pos":{"x":-32.32,"y":325.03}},{"id":8,"type":"binaryop","properties":{"prop_binaryop_left":"#7","prop_binaryop_type":"option_binaryop_type_gt","prop_binaryop_right":"20"},"pos":{"x":157.35,"y":323.77}},{"id":9,"type":"timer","properties":{"prop_timer_duration":"1.5","prop_timer_valuetype":"option_timer_valuetype_zeroone","prop_timer_wraptype":"option_timer_wraptype_reflect","prop_timer_active":1},"pos":{"x":173.45,"y":608.78}},{"id":10,"type":"rgbledindices","properties":{"prop_rgbled_color":"#12","prop_rgbled_indices":"2"},"pos":{"x":536.55,"y":524.5}},{"id":11,"type":"color","properties":{"prop_color_red":0.41002,"prop_color_green":0,"prop_color_blue":0.57255,"prop_color_value":"680092"},"pos":{"x":186.73,"y":453.48}},{"id":12,"type":"scale","properties":{"prop_source":"#11","prop_scale":"#9"},"pos":{"x":361.91,"y":523.77}},{"id":13,"type":"servopwmin","properties":{"prop_pin":11,"prop_servopwmin_calib_min":1000,"prop_servopwmin_calib_max":2000,"prop_servopwmin_mode":"option_inputmode_calibrated","prop_calib_min":1000,"prop_calib_max":2000},"pos":{"x":98.92,"y":779.7}},{"id":14,"type":"rgbledindices","properties":{"prop_rgbled_color":"#15","prop_rgbled_indices":"3"},"pos":{"x":532.84,"y":779.2}},{"id":15,"type":"binaryop","properties":{"prop_binaryop_left":"#13","prop_binaryop_type":"option_binaryop_type_gt","prop_binaryop_right":"0.75"},"pos":{"x":316.12,"y":781.5}},{"id":16,"type":"gps","properties":{"prop_gps_field":"option_gps_field_sats"},"pos":{"x":758.49,"y":395.67}},{"id":17,"type":"gps","properties":{"prop_gps_field":"option_gps_field_lat"},"pos":{"x":766.78,"y":547.61}},{"id":18,"type":"gps","properties":{"prop_gps_field":"option_gps_field_lon"},"pos":{"x":759.38,"y":680.6}},{"id":19,"type":"display","properties":{"prop_source":"#16","prop_color":1,"prop_bgcolor":0,"prop_display_row":2,"prop_display_label":"Sats: ","prop_display_maxdecimalplaces":0},"pos":{"x":947.33,"y":443.08}},{"id":20,"type":"display","properties":{"prop_source":"#17","prop_color":1,"prop_bgcolor":0,"prop_display_row":3,"prop_display_label":"Lat: "},"pos":{"x":948.78,"y":586.7}},{"id":21,"type":"display","properties":{"prop_source":"#18","prop_color":1,"prop_bgcolor":0,"prop_display_row":4,"prop_display_label":"Lon: "},"pos":{"x":948.42,"y":721.8}},{"id":22,"type":"gps","properties":{"prop_gps_field":"option_gps_field_second"},"pos":{"x":772.04,"y":240.46}},{"id":23,"type":"display","properties":{"prop_source":"#22","prop_color":1,"prop_bgcolor":0,"prop_display_row":1,"prop_display_label":"Sec: ","prop_display_maxdecimalplaces":0},"pos":{"x":947.72,"y":288.73}}],"featureSettings":{"feature_nrf24_type":"none","feature_ppmin_pin":"none","feature_ppmout_pin":"none","feature_uart1_role":"none","feature_uart2_role":"none","feature_uart3_role":"option_uart_gps","feature_display_driver":"option_display_i2c_ssd1306_128x64_flip","feature_dutypwm_frequency":"option_dutypwm_frequency_10000","feature_uartlog_type":"option_uartlog_type_disabled","feature_uartlog_baud":"option_uartlog_baud_115200","feature_uartlog_freq":"option_uartlog_freq_1hz","feature_gps_doinit":"option_gps_doinit_no","feature_gps_initdelay":"option_gps_initdelay_0","feature_gps_saveconfig":"option_gps_saveconfig_no","feature_rgbled_maxindex":"none","feature_mag_calibrate":"option_mag_calibrate_never","feature_mag_tiltcompimu":"option_mag_tiltcompimu_none","feature_mag_tiltcomp_x":"option_mag_axis_pos_x","feature_mag_tiltcomp_y":"option_mag_axis_pos_y","feature_mag_tiltcomp_z":"option_mag_axis_pos_z","feature_serialrc_type":"none","feature_uartlog_format":"option_uartlog_format_csv","feature_uartlog_rate":"option_uartlog_rate_1hz","nrf24_packet_format":[]},"weakConnections":[]}
Reply


Messages In This Thread
Cant tick Com port - by Kermets - 11-18-2024, 05:43 AM
RE: Cant tick Com port - by iforce2d - 11-18-2024, 08:10 AM
RE: Cant tick Com port - by Kermets - 11-18-2024, 08:34 AM
RE: Cant tick Com port - by iforce2d - 11-18-2024, 10:15 AM
RE: Cant tick Com port - by Kermets - 11-19-2024, 12:55 AM
RE: Cant tick Com port - by iforce2d - 11-19-2024, 01:29 AM
RE: Cant tick Com port - by iforce2d - 11-19-2024, 02:55 AM
RE: Cant tick Com port - by Kermets - 11-20-2024, 10:09 AM
RE: Cant tick Com port - by iforce2d - 11-20-2024, 10:27 AM
RE: Cant tick Com port - by Kermets - 11-21-2024, 02:17 AM
RE: Cant tick Com port - by iforce2d - 11-21-2024, 05:16 AM
RE: Cant tick Com port - by Kermets - 11-21-2024, 10:46 AM
RE: Cant tick Com port - by iforce2d - 11-21-2024, 10:51 PM

Forum Jump:


Users browsing this thread: 1 Guest(s)