11-18-2024, 08:10 AM
Hi Brett
Much has changed since I gave you those boards back in the day. I think that was before I even made a bootloader so you'd have to use a ST-Link dongle to flash the current firmware. To be honest my memory is a bit foggy about what boards you have there, or if I kept that target updated in my code, or if I still have any of those boards here myself to check with.
The configurator is looking for devices with the same device id as a STM32 Virtual COM Port but with "iomixer" in the product name. I suspect the ancient firmware on yours is not reporting any product name at all, but it would have been "sbusmixer" back then anyway. You can get around the disabled checkbox by inspecting the HTML and removing the 'disabled' property, but I think there would quickly be a new problem to deal with.
Can you check if yours is a v1.1 board as shown in the 'Board variants' section here? https://iomixer.com/prototypes/
If so, you can use a ST-Link dongle to flash the latest firmware, as shown in this video: https://youtu.be/BKhxOeRhcWc?t=933
The firmware files for a v1.1 board are here (use the 'both' file): https://iomixer.com/releases/v0.1.3/firm...oard_v1.1/
You'll also need to use the newer relay server, to have the new features and node types. https://iomixer.com/releases/v0.1.3/relayServer/
Much has changed since I gave you those boards back in the day. I think that was before I even made a bootloader so you'd have to use a ST-Link dongle to flash the current firmware. To be honest my memory is a bit foggy about what boards you have there, or if I kept that target updated in my code, or if I still have any of those boards here myself to check with.
The configurator is looking for devices with the same device id as a STM32 Virtual COM Port but with "iomixer" in the product name. I suspect the ancient firmware on yours is not reporting any product name at all, but it would have been "sbusmixer" back then anyway. You can get around the disabled checkbox by inspecting the HTML and removing the 'disabled' property, but I think there would quickly be a new problem to deal with.
Can you check if yours is a v1.1 board as shown in the 'Board variants' section here? https://iomixer.com/prototypes/
If so, you can use a ST-Link dongle to flash the latest firmware, as shown in this video: https://youtu.be/BKhxOeRhcWc?t=933
The firmware files for a v1.1 board are here (use the 'both' file): https://iomixer.com/releases/v0.1.3/firm...oard_v1.1/
You'll also need to use the newer relay server, to have the new features and node types. https://iomixer.com/releases/v0.1.3/relayServer/